Pro Series Round, A-Frame Jack - Topwind - 14" Lift - 2,000 lbs
(797 reviews)
Price: $39.05
In Stock
Pro Series Round, A-Frame Jack - Topwind - 14" Lift - 2,000 lbs
Item # PSEA20000103
Retail:$63.47
Our Price: $39.05
You Save: 38%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (797)
- Q & A (0)
- Photos
Pro Series Trailer Jack - PSEA20000103
- 1001 - 2000 lbs
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Topwind Jack
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Bolt-On
- Weld-On
- No Wheel or Foot
- Pro Series
- 14 Inch Lift
- Steel
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features an 8" retracted height and measures 11" from the mounting bracket to the top, excluding the handle. Base sold separately.
Features:
- Utility jack is perfect for agricultural and commercial applications
- Precision-fit parts provide exceptional stability and reliability
- Weld-on/bolt-on bracket mounts to any standard A-frame coupler
- Outer and inner tubes have black paint finish
- Topwind handle has smooth, ergonomic design for easy cranking
- Footplate or caster assembly sold separately
Specs:
- Bracket height:
- 8" Retracted
- 22" Extended
- Lift: 14"
- Clearance: 11" from mounting bracket to top of jack
- Inner tubing diameter: 2"
- Outer tubing: 2-1/4"
- Lift capacity: 2,000 lbs
- Limited 1-year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
EA20000103 Pro Series Round A-Frame Jack - Topwind - 14" Travel - 2,000 lbs
EA2000 Fulton A-Frame Utility Trailer Jack - Round, Topwind, 2,000 lbs
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Pro Series Round, A-Frame Jack - Topwind - 14" Lift - 2,000 lbs - PSEA20000103
Average Customer Rating: 4.8 out of 5 stars (797 Customer Reviews)
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features an 8" retracted height and measures 11" from the mounting bracket to the top, excluding the handle. Base sold separately.by: Mark 03/20/2024
fit great, works easy
by: Sharon 02/08/2024
use these jacks all the time
by: Larry Feggett08/15/2016
The trailer part was delivered on time and the unit was the right item, the first time.
by: Ben R.11/04/2016
Wow! This is a quality jack for the price. I just needed a simple, light duty jack as a replacement for the original one on a small cargo trailer. Even thought its weight rating was the same as the original, close inspection revealed that is constructed of noticeably heavier components. It was a direct replacement except for some minor fitting through the existing hole in the "A" frame trailer tongue. I am a returning customer to etrailer.com and will continue to do in the future. As far as I am concerned, they set the "gold standard" for the way online businesses should operate. They make the whole buying process (product selection, payment, shipping, etc.) simple and user-friendly. Way to go etrailer!
by: Dave N.01/02/2023
This side wind jack mounted on my Look cargo trailer in minutes. Now my tailgate has the clearance to open when I need items in the bed of my truck.
by: bodyhack12/13/2015
Perfect replacement fit, very good communication. Jack was not in stock but I was promptly notified and given other options. Stuck with original choice, which was shipped and delivered in the time framed given. The hardest part of installation was the motorcycle ride to Ace on a beautiful 60 degree December day to get new bolts.
Bodyhack
12/12/2016
The jack does its job, it has been up and down several times.
by: Jim H.11/03/2016
Excellent product quality. Great initial service.
Would recommend to anyone needing a trailer jack.
Jim H.
11/3/2017
It’s working fine.Thanks foe checking
by: steve d.06/01/2013
Jack was priced right for sure. I had to take a dremel tool and widen the bottom hole on the tongue so that it would fit down in the hole but once done, the job looks and works great..
by: Dave in Sedro Woolley10/15/2014
I bought this to replace the factory original I destroyed by not getting the trailer hooked up right. I ground off the footplate and about an inch of the jack tube before I got stopped. This jack fit the bolt holes perfectly, once I realized the back two mounting holes are actually 3 1/4 in. apart... not 3 in! The jack, based on the "industry standard of 3 in." actually does have a front and a back. The decal is on the front. (Um... I'm new at this.)
by: Ted09/10/2016
Easy to install. The old one was welded and had it cut off and then managed to bolt this one on. No problems after a year and handles the weight of the small cargo trailer fully loaded with no problems. Product was good quality and delivered promptly.
by: Gerald E03/23/2014
I received my product and after reading the reviews prior to ordering I was looking forward to the easy install.
when I received it and started the install, I found I was done in about five minutes!! It was straight forward and fit just like to original without a hitch!!! the jack was of great quality and worked like a charm! Thanks!!
by: Rollis07/23/2019
Perfect replacement for the original jack on my trailer
Rollis
7/24/2020
The jack has been working great, I added a grease fitting to be able to lube the inside which makes it smoother to operate
by: Nathan J.08/04/2016
This tongue jack has a very hardy construction that simply feels strong when handled, but at the same time requires little effort to crank. My one gripe would be that it doesn't come with mounting bolts, so you'll have to go out and purchase your own separately. Overall, I am confident in my choice of new hardware for an old trailer.
by: perry o.06/17/2017
Hey! It's a trailer jack. It appears of quality construction and works smoothly. The price was fair and the delivery was immediate. thanx etrailer po
by: Raymond06/01/2020
I have seldom used a retail portal with the features and information that etrailer has. As a first time user, it made a hard to find part easy to find and identify for my application. Shipping was instantaneous, packaging was extra sturdy. Explanatory text made sure I stayed on the right track.
I'll be back!
by: MATT F.06/11/2016
I bought this to replace the 1000lb jack on my boat trailer that someone hit while plowing and bent it. I settled on this one because of the price and installed height. (My old one was also too tall to allow me to lower the tailgate) this one installed easy, works as it should and even seems smother than the old one was before it was damaged. I would definetly buy another one if i needed to.
by: Kevin M01/20/2014
Exact replacement for my 7000lb flat bed trailer. Easy installation. One problem was that the bolt slots were wider then the slots on the OEM jack so I had to use washers to ensure a tight fir against the bolt heads.
by: TomS 09/29/2015
Needed replacement trailer jack on short notice
eTrailer had a great price, shipped the trailer jack within 24 hours and I had it installed in four days from my order date.
Great product value and excellent service
Highly recommend eTrailer
Thanks
TomS
by: Jim N.07/03/2015
I replaced the jack on the tongue of my big trailer with a jack from etrailer. I am very impressed with the quality of the jack and the fit was perfect. Based on this experience I bookmarked etrailer and recommend you at least give them a look.
by: Ralan Guyer04/17/2015
Worked like a charm! Easy installation, easy turn handle and lifted great on a 10,000 lb trailer with 800 lbs of tongue weight.
by: John C07/09/2020
Great transaction as usual with Etrailer. Shipping and communication is great each and every time.
by: Jim R.05/14/2017
Jack was as advertised. Easy to install. Shipping was prompt. Has worked perfectly for a year.
by: David S.08/02/2012
Received my A-Frame Jack very quickly and was just the right jack for my horse trailer. The old original jack was bent and no longer working well and the new jack works great and was easy to install. Thanks for the great service!
by: Ron06/20/2018
The trailer jacks were perfect fit and man they make cranking up that trailer a breeze
by: Ron C.06/04/2015
Great product and great everything at E -Trailer.
Ronald C.
6/3/2016
works great
25
797
Show More Reviews
See what our Experts say about this Pro Series Trailer Jack
- Recommended Electric A-Frame Jack for Trailer with 5,824 Dry Weight When looking at electric A-frame jacks, the important weight to consider on your trailer is its tongue weight. This is the weight that the jack will actually be lifting and not its total loaded weight. A trailer's tongue weight should be 10 to 15 percent of its total weight. If your trailer has an empty weight of 5,824 pounds, we can estimate a dry tongue weight of around 580 to 875 pounds. Note though that you will want to also account for the loaded cargo weight as well when the trailer...
view full answer... - Length of Pro Series 2K A-Frame Trailer Jack from Mounting Bracket to Bottom and Pin Hole DiameterOn the Pro Series Round, A-Frame Trailer Jack, # PSEA20000103, it measures 8 inches from the mounting bracket to the bottom of the inner tube. For the footplate, # PS1400700340, or the Wheel, # PS1400750340, (both fit this jack) the pin diameter is 5/16 of an inch and the length is 2-3/4 inches. The slotted holes on the mounting bracket measure 7/16 inches wide by 7/8 inches long. They are 3 inches apart on center.
view full answer... - Correct Weight Rating For A-Frame Trailer Jack On 6700lb TrailerAn A-Frame jack only needs to be rated high enough to support and lift the tongue weight of your trailer. Since your trailer weighs 6700lbs and tongue weight is typically 10-15% of the trailer weight you should have between 670-1005lbs tongue weight. With that figure in mind the Pro Series Round, A-Frame Jack - Topwind - 14" Lift - 2,000 lbs # PSEA20000103 you were looking at would be perfect if you are wanting a manual jack, or the # EJ-3520-WBX with a 3500lb rating would be a perfect...
view full answer... - Why Does an A-Frame Trailer Jack Get Difficult to CrankI spoke with my contact at Fulton jacks and he stated that what you are describing is a symptom of the jack screw inside the jack seizing up. Jack companies don't make the internals of their jacks easily accessible for cleaning and lubrication. Typically to get them apart requires quite a bit of work and then they are nearly impossible to get back together properly. You can try lubricating the jack from the bottom of the inner leg up into the top of the jack, but it's going to be much...
view full answer... - What are The Dimensions of the Jack Housing On The Pro Series Trailer Jack, # PSEA20000103On the Pro Series Trailer Jack, # PSEA20000103, the measurement from the the mounting bracket to the top of the housing is 11 inches. The measurement of just the jack housing below the mounting plate is 7 inches. The jack will stick out another inch on the bottom housing when fully retracted. I also have the Pro Series Trailer Jack, # PS1401000303, which is a topwind, 2,000 lbs. jack. It measures 16 inches from the mounting bracket to the top of the housing. The measurement of the jack...
view full answer... - Looking for A-Frame Trailer Jack That Retracts Enough to Clear Driveway ApronsSwivel jacks do not work well with A-frame trailers, so a swivel jack would not be a good choice. Your best bet would be to stay with an A-frame jack. I would recommend finding the jack with the lowest possible retracted height. For instance, the Pro Series # PSEA20000103 you mentioned has a retracted height of 8 inches, which would be the distance between the bottom of the jack tube and the mounting bracket. The Pro Series # PS1401000303 has the same 2000 lb capacity as the jack you mentioned,...
view full answer...
- Weight and Compatibility of 2,000 lbs Axle 5 on 4-1/2 Hub Combo and Components for a Custom TrailerI would be happy to help you. I'll start by giving you all the requested weights and then confirm compatibility. Dexter Trailer Axle with Idler Hubs item # 20545I-ST-72-15 weighs 40 lbs. This includes both idlers and the axle. Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel item # AM32424 weighs 46 lbs. This wheel has a 5 on 4-1/2 and is compatible with the above idler hubs. 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long item # e27SR weigh 10 lbs...
view full answer... - How to Grease the Gears on the Pro Series Round, A-Frame Jack, # PSEA20000103To grease the gears on the Pro Series Round, A-Frame Jack, # PSEA20000103, you would need to remove the handle and top plate to expose the gears. The gears come already greased but if more is needed, you would have to completely remove the old grease (not all greases are compatible with each other) before adding the new grease like LubriMatic LMX Industrial Strength Grease, # L11390.
view full answer... - Is a Base or Wheel Needed when Ordering the Pro Series Round A-Frame JackThe Pro Series Round, A-Frame Jack - Topwind - 14 inch Lift - 2,000 lbs, item # PSEA20000103, does not come with a footplate base, item # PS1400700340, or a wheel, item # PS1400750340, so that you can determine the best option for your setup and purchase accordingly. You would need to order a footplate if you park your trailer in a stationary position and do not need to move the trailer when not hooked to a vehicle. If you need to be able to move your trailer when it is not attached to...
view full answer... - Would the Pro Series Round, A-Frame Jack # PSEA20000103 fit a 3-1/4 inch Bolt Pattern on TrailerThe standard bolt pattern for a-frame jacks is 3 on 3 inch. However, if you look at the mounting flange of the Pro Series Round, A-Frame Jack # PSEA20000103 you will see that the mounting holes are slotted and allow for a bit of wiggle room there. An extra 1/4 inch wouldn't be a problem at all. This jack would work well for you, it has a 2,000 lb capacity so it would work well on your trailer.
view full answer...
- 2,000 lb A-Frame Jack RecommendationI was able to find the first jack you referenced, the EA2000103, and it is basically just a topwind, a-frame jack with a 2,000 lb capacity. For a jack that is basically identical you would want the Pro Series Jack part # PSEA20000103. Check out the review video I attached for more info as well. From the top of the jack to the bottom of the mounting bracket this jack measures 11 inches. From the bracket to the bottom of the jack when fully extended it is 22 inches, fully retracted 8 inches.
view full answer... - Tire Change Jack For An 11,000 lb Toy HaulerThere are a couple options that may interest you. One very popular option is the Blaylock EZ Jack # EZ-JACK. This is a wedge-style jack. Basically what you would do for a triple axle trailer is turn the curve up, opposite the wheel, and then drive the trailer up on to the jack which will allow you to change a tire. The main things I like about this option is that it is compact and lightweight, it also does not require any "elbow grease" like a manual crank jack. It also can be used as a...
view full answer... - How Far Apart Are The Bolt Holes On The Fulton Pro Series Round, A-Frame Jack, # PSEA20000103On the Fulton Pro Series Round, A-Frame Jack, # PSEA20000103, the bolt holes on the triangle mounting flange are 3 inches from center of one hole to the center of the next hole. They are equally spaced apart and they are elongated for easier installation.
view full answer... - Differences Between Pro Series Trailer Jack # PSEA20000103 and # PSEA20000340The only difference between the Pro Series trailer jack # PSEA20000103 and # PSEA20000340 is the finish. The part # PSEA20000340 is zinc coated steel and the # PSEA20000103 is powder coated black. Both are corrosion resistant finishes but power coating is better in that regard so that would be what I would go with.
view full answer... - How to Determine Correct Size Electric A-Frame Tongue Jack for 12,500-lb Triple Axle Trailer The correct electric A-Frame trailer tongue jack for your 12,500-lb triple axle travel trailer will need to have the capacity that will surpass your trailer's loaded tongue weight, which is typically between 10 and 15 percent of the loaded trailer's weight. So your 12,500 pound trailer would have a tongue weight between 1250 lbs and 1875 lbs, so any trailer jack rated over 2,000 lbs would be sufficient to lift the trailer's tongue, however I recommend a higher capacity and high quality...
view full answer... - Trailer Jack Wheel Recommendation for Pro Series Trailer Jack part # PSEA20000103For the Pro Series Jack part # PSEA20000103 that you have the correct wheel caster is the part # PS1400750340. Only thing you'll need to take note of is that this wheel cuts the capacity of the jack down to 1,200 lbs.
view full answer... - Trailer Jack Weight Capacities for Lifting and Holding WeightA trailer tongue jack like Pro Series # PSEA20000103 has a rated lift capacity of 2000-lbs. Two of them would have twice the capacity but this type of jack is typically used singly on an A-Frame trailer. Other types of jacks like a 5th wheel dual-jack landing gear kit # BD500162 consists of two separate but interconnected jacks each able to lift 4000-lbs which gives this kit its overall 8K rating. In comparison a stabilizer scissor jack like # UF48-979002 will have a much higher weight...
view full answer... - Possible Solution to Allow Tailgate to Fold Down without Hitting Trailer Powered JackThe jack you mentioned is a very standard RV style of A-frame jack. Your customer might have luck going with a longer ball mount to add clearance between the tailgate and the jack but there really isn't a great way to get a smaller powered jack. For example, we have the Curt ball mount part # D-26 which is 12-5/8 inches from hitch pin hole to ball hole which might give your customer the additional clearance needed.
view full answer... - What To Do if Trailer Jack Breaks Nut From Assembly and Stops FunctioningThe nut you are seeing in the inner pipe is not designed to be replaced. It sounds as if your jack was wound past is working limit and either broke or ruined the threads on the lift rod. You will need to replace the jack, if this is the case.
view full answer... - Trailer Jack Foot Plate Needed for a Jack with 1-5/8 inch O.D. TubingIt sounds like the Removable Steel Foot with Pin for DL22530 A-Frame Trailer Jack by Dutton-Lainson, item # DL22541, will be the closest fit we have for your trailer jack. This foot plate has an inner diameter of 1-3/4 inches which is slightly larger than your 1-5/8 inch outer diameter jack tube. All of the other foot plates that we carry have an inside diameter of 2 inches.
view full answer... - Trailer Jack Recommendation For 14,000 Lb A-frame Dump TrailerThe rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. So your 14,000 pound trailer would have a tongue weight between 1400 lbs and 2100 lbs so any trailer jack rated over 2,500 lbs would be sufficient to lift the trailer's tongue however I recommend a higher capacity and high quality designed jack because they tend to last a bit longer. The most common reason for a trailer jack to stop working is because of friction that breaks down the gears and and over-extension. I...
view full answer...
- Floor Jack to Change Wheel/Tire of 5,000 lb Trailer A 3,000 lb jack would be able to lift a 5,000 lb trailer since the jack would basically only be lifting half of the trailer weight since the other half is supported by the wheel on the other side. I think bare minimum you'd need a 2,500 lb jack though. That said going with a higher rated jack like the # PTW1605 which has a 4,000 lb capacity would be a really great choice as that just means that jacking up the trailer will be an easier job for you and this kit comes with jack stands which...
view full answer... - Compatibility of Weight Distribution System and Swivel JackA weight distribution system is not designed to accommodate the space needed for a swivel jack, since typically A-frame jacks are used on A-frame trailers. If the swivel jack and weight distribution system are not working together, you will want to move the swivel jack to provide the necessary room for the weight distribution system. Another option is to replace the swivel jack with an a-frame trailer jack. We offer several A-frame jacks with wheels already attached and many other a-frame...
view full answer... - Outside Dimensions of the Outer and and Inner Tube on the Pro Series A-Frame Top Wind Trailer JackThe outer tube diameter where the mounting flange is welded on to the Pro Series Round, A-Frame Jack, item # PSEA20000103, is 2-1/4 inches. The inner tube that extends and retracts has an outer diameter of 2 inches, see photo. At this time we do not have a Jack with an outer tube diameter of 1-7/8 inches and inner tube diameter of 1-5/8 inches. Your best options would most likely be to enlarge the hole in your mounting plate for a 2-1/4 inch diameter jack or to go with a frame mounted...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Ronnie R
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ben R.
11/15/2017
Thanks for checking in with me.I am still extremely pleased with both products! Great quality and reasonably priced. Etrailer is FIRST CLASS. I have told all my friends that etrailer is the ONLY place to shop for all towinghauling accessories because you have knowledgeable staff, great customer service and fantastic prices!